YOU LIKE IT more economical? SAERTEX- LINER® TYPE S+ & TYPE M


Our classic GRP-liner for the curing process with UV or steam:
Incorporated thousands of times, proven for years!

With the SAERTEX-LINER® TYPE S+ SAERTEX multiCom® is offering an unrivaled product for the trenchless rehabilitation of pipes. With an excellent short-term modulus of 20,500 s/mm² and a reduction factor of only 1,28, the SAERTEX-LINER® Type S+ is the GRP-Liner with the highest mechanical properties in market. 

For economical and cost effective rehabilitation of pipes at the highest level, we have developed the SAERTEX-LINER® Type M for the smaller dimensions up to DN 400, which is used in cases where the wall thickness is between 3 mm and 4 mm.

The large load capacity and the longevity of the SAERTEX-LINER® Type S+ and Type M are due to their excellent mechanical characteristics. The bending modulus and bending strength are particularly important in this context. Both liners are manufactured from durable chemical and corrosion-resistant glass. The infusion is done at the factory using polyester resin for the municipal sector or vinyl ester resin for industrial use.

The SAERTEX-LINER® is suitable for curing by means of steam as well as with UV-light. Compared to conventional curing needle felt liners using warm water, both methods feature low energy consumption, handy equipment, as well as extremely short curing times. Detailed consultations prior to the rehabilitation measures ensure that the most economical solution is used in your project.

At a glance


  • Individual liner lengths up to 500 m

  • All profiles (circular, egg- or mouth-shaped, box)

  • Bends of up to 30° and

  • Change of dimensions possible

  • Curing under UV or steam

  • DIBt-certification: Z-42.3-350


SAERTEX-LINER Profil

 

Mechanical Properties SAERTEX-LINER® Typ S+


 

Dimension range: 


Wall thickness in cured condition: 


Short-term circumferential E-Modul (ring stiffness): 


Long-term circumferential E-Modul (ring stiffness): 


Short-term bending E-Modul (three-point bending): 


Short-term bending strenght (three-point bending): 


Long-term bending strength (three-point beinding): 


Reduction factor A after 10,000 h: 


DN 100 mm - DN 1.600 mm / 6" - 64"


3 mm - 15 mm


≥ 20.500 N/mm² /≥ 2,973,000 PSI


16.000 N/mm² / 2,320,000 PSI


≥16.800 N/mm² /≥ 2,436,000 PSI


≥ 270 N/mm² / ≥ 39,160 PSI


210 N/mm² / 30,450 PSI


1.28


Mechanical Properties SAERTEX-LINER® TYP M


Dimension range:


Wall thickness in cured conditions:


Short-term circumferential E-Modul (ring stiffness): 


Short-term bending strength (three-point bending):


Reduction factor A after 10,000h:


DN 150 mm - DN 400 mm


3 mm - 4 mm


≥ 7,000 N/mm²


≥ 200 N/mm²


1.8


 

Structure


Download Flyer


Please click here to download more information and flyers of these products.

Saerbeck, 10th October 2018

Inventory & company holidays in December (Plant Saerbeck)

Due to our annual inventory we would like you to take following dates into consideration during your planning. Our office team will be available to assist as usual.

Read more...


Saerbeck, 01st October 2018

8TH SAERBECK PIPE SYMPOSIUM: 26. & 27.09.2019

On these days we will open the doors to the 8th Saerbeck Pipe Symposium in Münsterland.

Of course you will again find exciting lectures, interesting exhibitors in the indoor and outdoor area, live demonstrations and a great evening programme.

Read more...


Saerbeck, 06th June 2018

"SCHOOL GRADE" 1.5 FOR THE SHAFT-LINER OF SAERTEX multiCom

Our long-standing customer Swietelsky-Faber scored "very good (1.5)" with its SF shaft liner in a retest of the ICT product test "shaft rehabilitation". 

At our booth at IFAT in Munich last week, IKT-Managing Director Roland W. Waniek presented the IKT product test seal to Jörg Brunecker, Managing Director of Swietelsky-Faber.

Read more...

Saerbeck, 19th October 2017

New production and warehouse facility for SAERTEX multiCom

The construction work began early October on a new warehouse and production facility for SAERTEX multiCom at the site in Saerbeck. The project involves the installation of additional new production systems to expand the capacity for GRP-liners at the facility, which covers a surface area of  4,500 m2. The field of house connection liners (HASE) is being expanded with new areas, especially for the packaging, the impregnation, and the storage of the new light-cured liner.

Read more...


Read all news items here