The team from Saertex multiCom, a subsidiary of the Saertex Group in Saerbeck, is now working around the world on the trenchless rehabilitation of wastewater and pressure pipes. Last year, the company completed a project in São Paulo under special conditions.
In Santo Amaro, the main center in the south of São Paulo, Saertex multiCom has rehabilitated a drinking water pipeline that supplies around 900,000 households. "One of the three parallel pipes had a large leak, so it had to be repaired immediately to ensure the supply of water to the many people in Santo Amaro, to avoid wasting water and to prevent the pipe from breaking completely. The work also had to be carried out as quickly as possible to avoid overloading the other two pipes, which would take over the entire water supply to the district during the rehabilitation," says Kai Diecks, Global Managing Director at Saertex multiCom, describing the requirements.
The route of the pipeline was also a particularly big challenge for the renovation project: 172 of the 520-metre-long pipeline run through a busy mixed area of family homes, offices, bank headquarters and street traders. Residents, existing infrastructure and road traffic were to be affected as little as possible by the renovation work. An open construction site with large-scale earthworks was therefore ruled out. "Tearing up the roads and sidewalks would have been associated with immense traffic disruption as well as high levels of dirt and noise," explains Diecks.
Sabesp, the network operator for water supply and wastewater collection and treatment in the 375 municipalities of São Paulo, therefore opted for trenchless rehabilitation, in which a new pipe is pulled into the old one. The contract was awarded to the Brazilian company Sanit Engenharia, which drew on the expertise of Saertex multiCom. Around six months of preparation time was required for all project participants to coordinate on site and plan the construction work in detail. The Saerbeck-based company supplied a glass fiber reinforced pipe liner - a so-called GRP liner - specially developed for drinking water pipes for the dilapidated water pipe in Santo Amaro and supervised the installation on site. The advantage: "The smooth surface of the liner, combined with a low wall thickness, ensures that the internal diameter remains as large as possible, meaning that a lot of water can still flow through the pipe. This is crucial for pipe rehabilitation in densely populated regions such as São Paulo in order to secure the drinking water supply," says Ivo Hemsing, Business Development Pressure at Saertex multiCom, explaining the technology. "Our Saertex Liner H2O can withstand pressures of up to 33 bar, is now approved in over 14 countries worldwide and has already been used successfully in over 400 projects," adds Timo Münstermann, Product Manager at Saertex multiCom.
The project team carried out most of the work in Santo Amaro overnight to minimize disruption to traffic and residents and to be able to transport the equipment from the warehouse to the construction site more quickly. The experts built a small excavation pit in five places to gain access to the supply line in order to pull the new liner into the dilapidated pipeline. Using compressed air, they set up the GRP liner in the old pipe and cured it with UV light so that it fits snugly against the old pipe. "It only took us 18 hours to rehabilitate the longest section of 172 meters in Santo Amaro, so we had as little impact on the environment as possible," says Hemsing, explaining the process.
Global Managing Director Diecks still sees a lot of potential for trenchless pipe rehabilitation. According to a study by the International Water Association, around 346 million cubic meters of water are lost worldwide every day due to burst pipes, leaking pipes or outdated supply networks on the way to the consumer. According to the study, around 1.3 billion liters of drinking water seep into the ground unused every day in Germany. The German Association for Water Management therefore estimates that 25 percent of German pipes are in need of renovation. "Many pipes date back to before the Second World War. They urgently need to be replaced or renovated due to holes and cracks. Particularly in times of increasing droughts and the threat of water shortages, the repair of underground infrastructure will play an increasingly important role," explains Diecks. But only one percent is renovated each year, as large-scale construction measures are costly and planning-intensive. Trenchless pipe rehabilitation produces up to 70 percent less CO2 than open trench construction. By dispensing with excavation work, construction costs can be saved as well as CO2 and time, points out Daniel Kollmann, Business Development Wastewater at Saertex multiCom. The service life of a pipeline rehabilitated with glass fiber-reinforced pipe liners is at least 50 years. "More and more municipalities around the world are therefore opting for rehabilitation instead of replacing the entire pipe," says Kollmann, looking at current developments. More than 100,000 GRP pipe liners from Saertex multiCom have already been installed around the world. "With trenchless rehabilitation and our certified, glass fiber-reinforced pipe liners, we are responding to the high demand. We are convinced that the future belongs to trenchless technology and are delighted about the ever-growing interest in our rehabilitation solutions," says Kollmann, looking ahead.
The Saertex Group was founded in 1982 and is a manufacturer of lightweight construction materials made from glass, carbon, aramid and flax fibers. The fibre composites replace conventional materials such as steel and aluminium, minimize weight and are designed to maximize the service life of components. Technical textiles are used, for example, in aircraft and vehicle construction, in skis and snowboards, but also in boats. However, Saertex generates more than half of its annual turnover of around 350 million euros with products for the wind industry. With more than 300 employees in Saerbeck, Huntersville (USA) and Pinghu (China), the subsidiary Saertex multiCom produces hose liners made of glass fibers for the trenchless lining of wastewater and pressure pipes, for example for drinking water, gas and other media.